| Weights |
| Street Front |
5 swept spokes |
2.1 - 2.4 kg |
4.6 - 5.2 lbs |
| Race Front |
5 swept spokes |
1.9 - 2.1 kg |
4.1 - 4.6 lbs |
| GP1 Front |
5 swept spokes |
1.91 kg |
4.2 lbs |
| GP1 Rear |
5 swept spokes |
2.25 kg |
4.9 lbs |
| |
| Black Mamba front |
7 straight spokes |
2.49 kg |
5.48 lbs |
| Black Mamba rear |
7 straight spokes |
2.71 kg |
5.97 lbs |
| All weights include wheel complete with hub, bearings,
spacers and all fittings |
| Wheel Sizes |
| Front wheels |
17" x 3.5" |
5 swept spokes |
| |
17" x 3.6" |
5 swept spokes |
| 17" x 3.76" |
5 swept spokes |
| 16.5" x 3.5" |
5 swept spokes |
| 16.5" x 3.6" |
5 swept spokes |
| 17" x 3.5" |
7 straight spokes - Black Mamba, Ducati 1098 |
| Rear wheels |
17" x 5.50" |
Conventional swing arm, 5 swept spokes |
| |
17" x 5.75" |
Conventional & Single sided swing arm, 5 swept spokes |
| 17" x 6.0" |
Conventional & Single sided swing arm, 5 swept spokes |
| 17" x 6.0" |
Single sided swing arm, 7 straight spokes - Black Mamba, Ducati 1098 |
| 16.5" x 6.25" |
Conventional swing arm, 5 swept spokes |
| High performance and Drag Racing |
18" x 2.5" |
Conventional swing arm, 5 swept spokes |
| 17" x 6.625" |
Conventional swing arm, 5 swept spokes |
• DoT and JWL compliant
• Aerospace FAR25 qualified materials
• Manufacturing facility is TUV certified, and ISO 9001:2008 compliant
• Complete traceability in manufacturing process and materials used including the hubs
• Manufacturing process allows for full identification (each has its own Serial No) and traceability (based on the process used for critical parts in the aerospace industry)
• Nesting and cutting machines are the same as used in the aerospace industry
• Each wheel pattern is cut and the part is numbered simultaneously guaranteeing correctness and uniformity
• Layup of wheels is done in a Clean room (dust free environment)
• Wheels passed all tests for road certification carried out by Rim Technology and Eurotype test center.
• Corner fatigue carried out as specified in BS. AU. 50.
• Radial fatigue carried out as specified in BS. AU. 50.
• Torsional fatigue carried out as specified in BS. AU. 50.
• Impact test carried out as specified in JWL
• High Performance Wheels: these wheels are specially fabricated for drag racing and extreme performance, and feature unique sprocket carrier design and ceramic bearings.
